Startseite/Shop/Lebenswissenschaft/Mikroskopie/Reagenzien für die Histologie/Albumine, BSA
Rinderserumalbumin (BSA) Fraktion V, IgG-frei, US-Herkunft, 10 g

Rinderserumalbumin (BSA) Fraktion V, IgG-frei, US-Herkunft, 10 g

Art.-Nr. 1ET9.1
€ 81,59
lieferbar
1
Auf den Merkzettel
Rinderserumalbumin (BSA) Fraktion V, IgG-frei, US-Herkunft, 10 g
Produktbeschreibung
P-Sätze: P273 P301+P310 P331
H-Sätze: H304-H410
CAS-Nummer: 8000-27-9
Gefahrenklasse: 9 III
HS-Code: 35029020
Marke: Carl Roth
Bovine Serum Albumin (BSA) Fraction V,, IgG-free, US-Origin, min. 98 %,, for biochemistry and molecular biology, Molar mass (M) ~66 000 g/mol, Storage temp. +4 °C, CAS No. [9048-46-8], EG-Nr. 232-936-2

For purification of this Albumin an extensive heat-shock/diafiltration method is used, which has been shown to bring more highly purified products than the standard process acc. to Cohn. The process is taking place in a closed system.


Molar extinction coefficient: 4,4x104 L x mol-1 x cm-1 (acc. to 0,667 L x mol-1 x cm-1 for a 0,1 % solution).



Bovine Serum Albumin (BSA) Fraction V, IgG free, US-Origin ≥98 %, IgG-free, for biochemistry and molecular biology

Albumin, highly purified and tested for the presence of immunoglobulins (IgGs)
The Albumin, IgG-free, US-Origin is especially recommended to stabilize antibody solutions and as blocking reagent in all assays working with antibodies. Due to its particularly low protease content, it is also well suited for use in all other protein assays that could be interfered with by protease presence.


Tested for the absence of detectable IgG.



Recommended Application of Bovine Serum Albumins (BSA)

BSA Art. No. Recommended Application
Albumin Solution 20 %, Europe 9400 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply.
Albumin Solution 30 %, Europe 9401 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply.
Albumin Solution 30 %, with azide, US-Origin 9414 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply. Recommended if albumin with certified origin USA has to be used.
Fraction V, Europe 1ETA Stabilisation of proteins and blocking reagent in protein biochemical detection systems. Basically suitable for all assays unless specific requirements apply.
Fraction V, US-Origin 3854 Stabilisation of proteins and blocking reagent in all standard biochemical detection systems. Basically suitable for all assays unless specific requirements apply. Recommended if albumin with certified origin USA has to be used.
Fraction V, NZ-Origin 8076 Stabilisation of proteins and blocking reagent in protein biochemical detection systems. Basically suitable for all assays unless specific requirements apply. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, pH 5.2, Europe 2834 Stabilisation of proteins and blocking reagent. Particularly recommended for Western-Blotting and ELISAs.
Fraction V, pH 5.2, US-Origin 1ET8 Stabilisation of proteins and blocking reagent. Particularly recommended for Western-Blotting and ELISAs. Recommended if albumin with certified origin USA has to be used.
Fraction V, sufhydryl-blocked, NZ-Origin 1ET3 Particularly sensitive assays where monomeric albumin is guaranteed to be used or where reproducibility is particularly important. Can be stored as monomers over a longer period of time.
Fraction V, biotin-free, NZ-Origin 0163 Stabilisation of proteins and blocking reagent in all biotin / streptavidin-mediated detection systems (membrane-bound- or coating-plate-assays, as well as soluble assays).
Fraction V, protease-free, Europe T844 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays.
Fraction V, protease-free, US-Origin 1ET5 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays. Recommended if albumin with certified origin USA has to be used.
Fraction V, protease-free, NZ-Origin 1ET7 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, IgG-free, US-Origin 1ET9 Stabilisation of antibodies. Blocking reagent in all antibody-mediated detection systems and Radio-Immuno Assays (RIAs). Reduces false-positive signals. Recommended if albumin with certified origin USA has to be used.
Fraction V, IgG-free, NZ-Origin 3737 Stabilisation of antibodies. Blocking reagent in all antibody-mediated detection systems and Radio-Immuno Assays (RIAs). Reduces false-positive signals. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, fatty acid-free, Europe 0052 Stabilisation of proteins and blocking reagent in detection systems. Particularly recommended for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins.
Fraction V, fatty acid-free, US-Origin 9638 Particularly for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins. Also well suited for cell biology and all antibody-mediated detection systems. Recommended if albumin with certified origin USA has to be used.
Fraction V, fatty acid-free, NZ-Origin 1ETC Stabilisation of proteins and blocking reagent in detection systems. Particularly for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, very low endotoxin, US-Origin 1ET6 Cell culture of all cell lines, primary cells, stem cells. Cloning and 3D-cultures or cell-stressing assays like transfections, in vitro infections, cell fusion. Recommended if albumin with certified origin USA has to be used.
Fraction V, very low endotoxin, NZ-Origin 1ET4 Cell culture of all cell lines, primary cells, stem cells. Cloning and 3D-cultures or cell-stressing assays like transfections, in vitro infections, cell fusion. Recommended if albumin with certified origin New Zealand or Australia has to be used..

Molar extinction coefficient: 4,4x104 L x mol-1 x cm-1 (acc. to 0,667 L x mol-1 x cm-1 for a 0,1 % solution).


BSA are proteins yielded from blood, which function as binding and transport proteins in blood circulation. Depending on the preparation process, the albumins contain different quality and quantities of metabolic products, enzymes, peptides, fatty acids, vitamines, etc. and are suitable for different applications.


Heatshock albumin

For purification of this Albumin an extensive heat-shock/diafiltration method is used, which has been shown to bring more highly purified products than the standard process acc. to Cohn. The process is taking place in a closed system.


Albumin, NZ-Origin is particularly recommended when procedural regulations require the use of albumin of guaranteed origin Australia or New Zealand.


BSA, US-Origin is particularly recommended if the use of albumin with certified US-Origin is dictated by process regulations.


Albumin of European origin is produced from blood of European cattle herds. It is excellent for use in all assays and products manufactured for regions outside the USA, Australia and New Zealand.


Appearance powder to flakes
Colour pale yellow to greenish
Origin USA
Assay ≥98 %
Protein ≥98 %
Loss on drying ≤5 %
Solution (4 % in H2O) complies
pH value (10 % in H2O) 6.5-7.5
Sulphated ash ≤2 %
Sodium (Na) tested
Chloride (Cl) tested
Calcium (Ca) tested
Potassium (K) tested
Phosphor (P) tested
Heavy metals ≤10 ppm
IgG (COBAS) none detected
Protease ≤0.005 U/mg
Mehr anzeigen
Das könnte Ihnen auch gefallen
2-(Methylthio)pyrido[4,3-d]pyrimidin-5(6H)-one, 97.0%, 250mg
2-(Methylthio)pyrido[4,3-d]pyrimidin-5(6H)-one, 97.0%, 250mg
2-(Methylthio)pyrido[4,3-d]pyrimidin-5(6H)-one, 97.0%, 250mg
Art.-Nr. F050521-250MG
€ 26,40
2-Bromo-5-chloropyridine-3-carbonitrile, 95+%, 500mg
2-Bromo-5-chloropyridine-3-carbonitrile, 95+%, 500mg
2-Bromo-5-chloropyridine-3-carbonitrile, 95+%, 500mg
Art.-Nr. F625254-500MG
€ 693,00
tert-Butyl 3H-spiro[isobenzofuran-1,4'-piperidine]-1'-carboxylate, 97%, 250mg
tert-Butyl 3H-spiro[isobenzofuran-1,4'-piperidine]-1'-carboxylate, 97%, 250mg
tert-Butyl 3H-spiro[isobenzofuran-1,4'-piperidine]-1'-carboxylate, 97%, 250mg
Art.-Nr. F605757-250MG
€ 22,00
500 ml Originalitätsdose PE weiß 100 rund
500 ml Originalitätsdose PE weiß 100 rund
500 ml Originalitätsdose PE weiß 100 rund
Art.-Nr. 4-1101-0500-100
€ 1,55
Ethyl 3-amino-4,4,4-trifluorocrotonate, 96.0%, 100g
Ethyl 3-amino-4,4,4-trifluorocrotonate, 96.0%, 100g
Ethyl 3-amino-4,4,4-trifluorocrotonate, 96.0%, 100g
Art.-Nr. F001495-100G
€ 44,00
Methyl 3-iodo-4-methylbenzoate, 98.0%, 5g
Methyl 3-iodo-4-methylbenzoate, 98.0%, 5g
Methyl 3-iodo-4-methylbenzoate, 98.0%, 5g
Art.-Nr. F215998-5G
€ 15,40
3-BROMO-4-ETHYLPYRIDIN-2-AMINE, 95%, 100mg
3-BROMO-4-ETHYLPYRIDIN-2-AMINE, 95%, 100mg
3-BROMO-4-ETHYLPYRIDIN-2-AMINE, 95%, 100mg
Art.-Nr. F804564-100MG
€ 231,00
4-Bromo-1-ethoxy-2-(trifluoromethyl)benzene, 95.0%, 1g
4-Bromo-1-ethoxy-2-(trifluoromethyl)benzene, 95.0%, 1g
4-Bromo-1-ethoxy-2-(trifluoromethyl)benzene, 95.0%, 1g
Art.-Nr. F229433-1G
€ 52,80
Pipecolyldithiocarbamic Acid Pipecolinium Salt, 98.0%, 5g
Pipecolyldithiocarbamic Acid Pipecolinium Salt, 98.0%, 5g
Pipecolyldithiocarbamic Acid Pipecolinium Salt, 98.0%, 5g
Art.-Nr. F549475-5G
€ 31,90
6-Hydroxypyridazine-3-carboxylic acid hydrochloride, 97.0%, 1g
6-Hydroxypyridazine-3-carboxylic acid hydrochloride, 97.0%, 1g
6-Hydroxypyridazine-3-carboxylic acid hydrochloride, 97.0%, 1g
Art.-Nr. F054051-1G
€ 71,50
3-Nitrophenyl p-Toluenesulfonate>98.0%(GC)25g
3-Nitrophenyl p-Toluenesulfonate>98.0%(GC)25g
3-Nitrophenyl p-Toluenesulfonate>98.0%(GC)25g
Art.-Nr. T1210-25G
€ 139,70
4-Methyl-2-(aminomethyl)thiophene, 95.0%, 250mg
4-Methyl-2-(aminomethyl)thiophene, 95.0%, 250mg
4-Methyl-2-(aminomethyl)thiophene, 95.0%, 250mg
Art.-Nr. F023898-250MG
€ 178,20
  • Produkte suchen
  • Mein Benutzerkonto
  • Bestellungen verfolgen
  • Lieblingsprodukte
  • Warenkorb
Preise anzeigen in:EUR
Zum Hauptinhalt wechseln
SciSupplies
Shop
Über uns
Kontakt
FAQ
DE
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Mein KontoSuche
Warenkorb
Menü
Teil von HD Beverwijk Trading
Sprache:
DE
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Allgemeine GeschäftsbedingungenDatenschutzerklärungVersand- und ZahlungsinformationenWiderrufsrechtMissbrauch melden
Hergestellt mit Ecwid von Lightspeed