Homepage/Negozio/Scienza di vita/Microscopia/Substrati per istologia/Substrati per la perossidasi di rafano equino (HRP)
ROTI®Lumin, 2 x 120 ml

ROTI®Lumin, 2 x 120 ml

Codice articolo P078.1
€ 539,50
Disponibile
1
Salva questo articolo per dopo
ROTI®Lumin, 2 x 120 ml
Dettagli del prodotto
Frasi P: P210 P280 P302+P352 P304+P340 P305+P351+P338 P308+P311
Frasi H: H225-H290-H302+H312+H332-H318-H336-H370
Classe di rischio: 3 (8) II
Codice SA: 38229000
Marca: Carl Roth
ROTI®Lumin, 10x conc., fluorecent-free, for protein and cytoimmunochemistry, Storage temp. +4 °C

  • Sensitive and reliable
  • For all standard membrane types
  • Low background
  • No cumbersome preparation of peroxidase buffers
  • Suitable for multiple stripping and hybridisation

ROTI®Lumin is a kit for chemoluminescent detection of peroxidase-linked reporters (e.g. HRP-antibodies), as can be found in Western-Blot assays. In comparison to chromogen substrates, ROTI®Lumin displays increased sensitivity and reduced background reaction.


Mechanisme

ROTI®Lumin is transformed by the HRP into an excited dianion in the presence of hydrogen peroxide. When the dianion is reversed back to its normal state, light is emitted. The light emission of ROTI®Lumin reaches its maximum within 5 minutes and remains at the maximum level for approx. 1-2 hours.



ROTI®Lumin 10x conc., fluorescence-free, for protein and cytoimmunochemistry
Gebruiksinstructies

ROTI®Lumin consists of two solutions, which should be mixed at a 1:1 ratio before use. It can be used with nitrocellulose, nylon and PVDF membranes. Optimal results can be achieved with Immobilon-P® PVDF or ROTI®PVDF.
Can be used for Western-Blotting, ELISA, Southern- Blotting, Dot-Blotting and colony hybridisation. Membranes may be stripped from bound probes using ROTI®Free stripping buffer, and may thus undergo multiple reprobing.

RotiLumine_Sensitivitaet
Figure: Sensitivity of the ROTI®Lumine.
Sensitivity of ROTI®Lumin ultra is found in low femtogram range. Detection of a polyclonal antibody (left to right 4 pg, 400 fg, 40 fg, 4 fg) on ROTI®PVDF (Art. No. T830.1). Staining in PBST via a HRP-conjugated anti-rabbit antibody (1:2000).
a/A: ROTI®Lumin ultra; b/B: ROTI®Lumin plus; c/C: ROTI®Lumin; d/D: Product of a competitor, recommended for femtogram range. a/b/c/d: 10 sec. exposition, A/B/C/D: 1 min. exposition.
3692_Diagramm_Lichtemission30min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-30 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.

De kit bevat

120 ml (25 ml) ROTI®Lumin 1 (Art. No. P079) and 120 ml (25 ml) ROTI®Lumin 2 (Art. No. P080).
Contents of this Kit may not be bought separately.

3692_Diagramm_LichtemissionB
Figure:
Relative sensitivity of ROTI®Lumins. Measurement of the relative light emission following ECL reaction with solubilised HRP.
Competitor P: Product of a competitor, recommended for femtogram range.
3692_Diagramm_Lichtemission5min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-5 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.


Technische informatie
Toepassing Western, in situ, Histochemistry
Enzyme Horseradish Peroxidase
Bewijs chemoluminescent
Signaalproduct Precipitate (Blot)
Toepassing Western
Assay protocol for use of BCIP/NBT in immunoblot procedures:

Stock solutions (All solutions are stable for at least 1 year at 4 °C):
0.5 g NBT in 10 ml 70 % dimethylformamide;
0.5 g BCIP (p-toluidine salt) in 10 ml 100 % dimethylformamide.
Incubation buffer for alkaline phosphatase:
100 mM NaCl, 5 mM MgCl2,100 mM Tris (pH 9.5).
Fresh substrate solution: 66 μl NBT stock solution + 10 ml incubation buffer, mix well, add 33 μl BCIP stock solution. Use within 1 hour.
Blot development: Approx. 10 ml substrate solution per 15 x 15 cm2 membrane surface. Develop at room temperature until bands become visible (approx. 30 mins).
Reaction stop: Rinse with PBS/20 mM EDTA.


Detection of peroxidase activity (Immunoassay):

Dissolve 1 mg TMB in 0.1 ml dimethylsulfoxide (Art. No. 4720); add 9.9 ml of a 0.1 M sodium acetate solution (pH 6.0) (Powder: Art. No. 6779), filter and add H2O2 (Art. No. 8070) (final concentration 0.01 %).

Always prepare freshly!

Incubation 10-30 mins at room temperature (approx. 50 μl per microtitre well; finally add 50 μl 1 M H2SO4, Art. No. X873, per well).
Photometric quantitation at 450 nm.

Reference: Bos E.S. et al. (1981) J. Immunoassay 2, (3/4), 187.


Visualizza altro
Potrebbe anche interessarti
tert-butyl 3-{[(pyridin-3-yl)methyl]amino}propanoate, 95.0%, 10g
tert-butyl 3-{[(pyridin-3-yl)methyl]amino}propanoate, 95.0%, 10g
tert-butyl 3-{[(pyridin-3-yl)methyl]amino}propanoate, 95.0%, 10g
Codice articolo F522713-10G
€ 633,60
(3-cyclopentylpropyl)methylamine hydrochloride, 95.0%, 25g
(3-cyclopentylpropyl)methylamine hydrochloride, 95.0%, 25g
(3-cyclopentylpropyl)methylamine hydrochloride, 95.0%, 25g
Codice articolo F359240-25G
€ 1 518,00
2'-Deoxyuridine 5'-monophosphate (disodium), 1g
2'-Deoxyuridine 5'-monophosphate (disodium), 1g
2'-Deoxyuridine 5'-monophosphate (disodium), 1g
Codice articolo F987768-1G
€ 137,50
(7-oxaspiro[3.5]nonan-2-yl)methanol, 95.0%, 250mg
(7-oxaspiro[3.5]nonan-2-yl)methanol, 95.0%, 250mg
(7-oxaspiro[3.5]nonan-2-yl)methanol, 95.0%, 250mg
Codice articolo F541907-250MG
€ 627,00
[1-(2-methylphenyl)cyclopropyl]methanamine, 98%, 250mg
[1-(2-methylphenyl)cyclopropyl]methanamine, 98%, 250mg
[1-(2-methylphenyl)cyclopropyl]methanamine, 98%, 250mg
Codice articolo F669130-250MG
€ 74,80
2-amino-N-(2-phenylethyl)acetamide hydrochloride, 95.0%, 500mg
2-amino-N-(2-phenylethyl)acetamide hydrochloride, 95.0%, 500mg
2-amino-N-(2-phenylethyl)acetamide hydrochloride, 95.0%, 500mg
Codice articolo F355709-500MG
€ 272,80
End user declaration required
Cryptotanshinone>97.0%(HPLC)100mg
Cryptotanshinone>97.0%(HPLC)100mg
Cryptotanshinone>97.0%(HPLC)100mg
Solo per aziende registrate
Codice articolo C3363-100MG
€ 78,10
4,5-Dibromo-6,7-dihydro-1H-indeno[5,4-b]furan-8(2H)-one, 97%, 5g
4,5-Dibromo-6,7-dihydro-1H-indeno[5,4-b]furan-8(2H)-one, 97%, 5g
4,5-Dibromo-6,7-dihydro-1H-indeno[5,4-b]furan-8(2H)-one, 97%, 5g
Codice articolo F787792-5G
€ 603,90
Methyl 3-Amino-4-methoxybenzoate>98.0%(T)5g
Methyl 3-Amino-4-methoxybenzoate>98.0%(T)5g
Methyl 3-Amino-4-methoxybenzoate>98.0%(T)5g
Codice articolo M1715-5G
€ 106,70
ethyl 6-(3,5-ditrifluoromethylphenyl)-6-oxohexanoate, 97.0%, 2g
ethyl 6-(3,5-ditrifluoromethylphenyl)-6-oxohexanoate, 97.0%, 2g
ethyl 6-(3,5-ditrifluoromethylphenyl)-6-oxohexanoate, 97.0%, 2g
Codice articolo F207671-2G
€ 1 989,90
Accessori inserti per vassoio standard serie Trayster, 24 provette 5 ml (12 mm), 1 pezzo
Accessori inserti per vassoio standard serie Trayster, 24 provette 5 ml (12 mm), 1 pezzo
Accessori inserti per vassoio standard serie Trayster, 24 provette 5 ml (12 mm), 1 pezzo
Codice articolo ANE8.1
€ 59,92
4-Amino-4H-1,2,4-triazole-3-thiol, 97.0%, 250mg
4-Amino-4H-1,2,4-triazole-3-thiol, 97.0%, 250mg
4-Amino-4H-1,2,4-triazole-3-thiol, 97.0%, 250mg
Codice articolo F009880-250MG
€ 50,60
  • Cerca prodotti
  • Il mio profilo
  • Verifica ordini
  • Preferiti
  • Carrello
Mostra prezzi in:EUR
Passa al contenuto principale
SciSupplies
Negozio
Chi siamo
Contattaci
FAQ
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Il mio profiloCerca
Carrello
Menu
Parte di HD Beverwijk Trading
Lingua:
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Termini e condizioniInformativa sulla privacyInformazioni di spedizione e pagamentoPolitica di resoSegnala abuso
Realizzato con Ecwid di Lightspeed