Homepage/Negozio/Scienza di vita/Microscopia/Substrati per istologia/Substrati per la perossidasi di rafano equino (HRP)
ROTI®Lumin, 2 x 25 ml

ROTI®Lumin, 2 x 25 ml

Codice articolo P078.2
€ 143,81
Disponibile
1
Salva questo articolo per dopo
ROTI®Lumin, 2 x 25 ml
Dettagli del prodotto
Frasi P: P202 P280 P302+P352 P305+P351+P338 P310
Frasi H: H314-H341
Classe di rischio: 8 II
Codice SA: 38229000
Marca: Carl Roth
ROTI®Lumin, 10x conc., fluorecent-free, for protein and cytoimmunochemistry, Storage temp. +4 °C

  • Sensitive and reliable
  • For all standard membrane types
  • Low background
  • No cumbersome preparation of peroxidase buffers
  • Suitable for multiple stripping and hybridisation

ROTI®Lumin is a kit for chemoluminescent detection of peroxidase-linked reporters (e.g. HRP-antibodies), as can be found in Western-Blot assays. In comparison to chromogen substrates, ROTI®Lumin displays increased sensitivity and reduced background reaction.


Mechanisme

ROTI®Lumin is transformed by the HRP into an excited dianion in the presence of hydrogen peroxide. When the dianion is reversed back to its normal state, light is emitted. The light emission of ROTI®Lumin reaches its maximum within 5 minutes and remains at the maximum level for approx. 1-2 hours.



ROTI®Lumin 10x conc., fluorescence-free, for protein and cytoimmunochemistry
Gebruiksinstructies

ROTI®Lumin consists of two solutions, which should be mixed at a 1:1 ratio before use. It can be used with nitrocellulose, nylon and PVDF membranes. Optimal results can be achieved with Immobilon-P® PVDF or ROTI®PVDF.
Can be used for Western-Blotting, ELISA, Southern- Blotting, Dot-Blotting and colony hybridisation. Membranes may be stripped from bound probes using ROTI®Free stripping buffer, and may thus undergo multiple reprobing.

RotiLumine_Sensitivitaet
Figure: Sensitivity of the ROTI®Lumine.
Sensitivity of ROTI®Lumin ultra is found in low femtogram range. Detection of a polyclonal antibody (left to right 4 pg, 400 fg, 40 fg, 4 fg) on ROTI®PVDF (Art. No. T830.1). Staining in PBST via a HRP-conjugated anti-rabbit antibody (1:2000).
a/A: ROTI®Lumin ultra; b/B: ROTI®Lumin plus; c/C: ROTI®Lumin; d/D: Product of a competitor, recommended for femtogram range. a/b/c/d: 10 sec. exposition, A/B/C/D: 1 min. exposition.
3692_Diagramm_Lichtemission30min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-30 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.

De kit bevat

120 ml (25 ml) ROTI®Lumin 1 (Art. No. P079) and 120 ml (25 ml) ROTI®Lumin 2 (Art. No. P080).
Contents of this Kit may not be bought separately.

3692_Diagramm_LichtemissionB
Figure:
Relative sensitivity of ROTI®Lumins. Measurement of the relative light emission following ECL reaction with solubilised HRP.
Competitor P: Product of a competitor, recommended for femtogram range.
3692_Diagramm_Lichtemission5min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-5 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.


Technische informatie
Toepassing Western, in situ, Histochemistry
Enzyme Horseradish Peroxidase
Bewijs chemoluminescent
Signaalproduct Precipitate (Blot)
Toepassing Western
Assay protocol for use of BCIP/NBT in immunoblot procedures:

Stock solutions (All solutions are stable for at least 1 year at 4 °C):
0.5 g NBT in 10 ml 70 % dimethylformamide;
0.5 g BCIP (p-toluidine salt) in 10 ml 100 % dimethylformamide.
Incubation buffer for alkaline phosphatase:
100 mM NaCl, 5 mM MgCl2,100 mM Tris (pH 9.5).
Fresh substrate solution: 66 μl NBT stock solution + 10 ml incubation buffer, mix well, add 33 μl BCIP stock solution. Use within 1 hour.
Blot development: Approx. 10 ml substrate solution per 15 x 15 cm2 membrane surface. Develop at room temperature until bands become visible (approx. 30 mins).
Reaction stop: Rinse with PBS/20 mM EDTA.


Detection of peroxidase activity (Immunoassay):

Dissolve 1 mg TMB in 0.1 ml dimethylsulfoxide (Art. No. 4720); add 9.9 ml of a 0.1 M sodium acetate solution (pH 6.0) (Powder: Art. No. 6779), filter and add H2O2 (Art. No. 8070) (final concentration 0.01 %).

Always prepare freshly!

Incubation 10-30 mins at room temperature (approx. 50 μl per microtitre well; finally add 50 μl 1 M H2SO4, Art. No. X873, per well).
Photometric quantitation at 450 nm.

Reference: Bos E.S. et al. (1981) J. Immunoassay 2, (3/4), 187.


Visualizza altro
Potrebbe anche interessarti
Scatola portaoggetti ROTILABO® 100 slot, blu, 1 Pezzo
Scatola portaoggetti ROTILABO® 100 slot, blu, 1 Pezzo
Scatola portaoggetti ROTILABO® 100 slot, blu, 1 Pezzo
Codice articolo N197.1
€ 30,50
METHANEDISULFONYL DICHLORIDE, 96%, 100mg
METHANEDISULFONYL DICHLORIDE, 96%, 100mg
METHANEDISULFONYL DICHLORIDE, 96%, 100mg
Codice articolo F801719-100MG
€ 22,00
Ethyl 2,4-Dichloropyrimidine-5-carboxylate>98.0%(GC)5g
Ethyl 2,4-Dichloropyrimidine-5-carboxylate>98.0%(GC)5g
Ethyl 2,4-Dichloropyrimidine-5-carboxylate>98.0%(GC)5g
Codice articolo E1154-5G
€ 188,10
4-Hydroxy-3-methoxyphenylacetonitrile, 95.0%, 5g
4-Hydroxy-3-methoxyphenylacetonitrile, 95.0%, 5g
4-Hydroxy-3-methoxyphenylacetonitrile, 95.0%, 5g
Codice articolo F146405-5G
€ 1 087,90
Oxazole, 2,2'-(1-methylethylidene)bis[4,5-dihydro-4,5-diphenyl-, (4R,4'R,5S,5'S)-, 97%, 100mg
Oxazole, 2,2'-(1-methylethylidene)bis[4,5-dihydro-4,5-diphenyl-, (4R,4'R,5S,5'S)-, 97%, 100mg
Oxazole, 2,2'-(1-methylethylidene)bis[4,5-dihydro-4,5-diphenyl-, (4R,4'R,5S,5'S)-, 97%, 100mg
Codice articolo F861959-100MG
€ 56,10
5-Hydroxyquinolin-2(1H)-one, 95.0%, 1g
5-Hydroxyquinolin-2(1H)-one, 95.0%, 1g
5-Hydroxyquinolin-2(1H)-one, 95.0%, 1g
Codice articolo F218255-1G
€ 92,40
4-butylphenol, 96.0%, 1g
4-butylphenol, 96.0%, 1g
4-butylphenol, 96.0%, 1g
Codice articolo F358059-1G
€ 15,40
(2E)-1-(2,4-dimethylphenyl)-3-(3-methylphenyl)prop-2-en-1-one, 95.0%, 2g
(2E)-1-(2,4-dimethylphenyl)-3-(3-methylphenyl)prop-2-en-1-one, 95.0%, 2g
(2E)-1-(2,4-dimethylphenyl)-3-(3-methylphenyl)prop-2-en-1-one, 95.0%, 2g
Codice articolo F524094-2G
€ 712,80
Bottiglia meplat da 100 ml vetro marrone GL 22 meplat
Bottiglia meplat da 100 ml vetro marrone GL 22 meplat
Bottiglia meplat da 100 ml vetro marrone GL 22 meplat
Codice articolo 1-0601-0100-22
€ 1,77
N-(2-IODOPHENYL)ACRYLAMIDE, 95.0%, 1g
N-(2-IODOPHENYL)ACRYLAMIDE, 95.0%, 1g
N-(2-IODOPHENYL)ACRYLAMIDE, 95.0%, 1g
Codice articolo F306224-1G
€ 1 163,80
End user declaration required
Idrochinone 99,8%, extra puro 25 chilogrammi
Idrochinone 99,8%, extra puro 25 chilogrammi
Idrochinone 99,8%, extra puro 25 chilogrammi
Solo per aziende registrate
Codice articolo K2983.3
€ 945,36
(S)-(+)-1-Methoxy-2-propanol, 98.0%, 10g
(S)-(+)-1-Methoxy-2-propanol, 98.0%, 10g
(S)-(+)-1-Methoxy-2-propanol, 98.0%, 10g
Codice articolo F036091-10G
€ 34,10
  • Cerca prodotti
  • Il mio profilo
  • Verifica ordini
  • Preferiti
  • Carrello
Tecnologia Lightspeed
Mostra prezzi in:EUR
Passa al contenuto principale
SciSupplies
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Menu
Negozio
Chi siamo
Contattaci
FAQ
Blog

Parte di HD Beverwijk Trading

Lingua:
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Termini e condizioniInformativa sulla privacyInformazioni di spedizione e pagamentoPolitica di resoSegnala abuso
Tecnologia Lightspeed