Homepage/Negozio/Scienza di vita/Microscopia/Reagenti per l'istologia/Albumine, BSA
Albumina di siero bovino (BSA) frazione V, pH 5,2, origine USA, 500 g

Albumina di siero bovino (BSA) frazione V, pH 5,2, origine USA, 500 g

Codice articolo 1ET8.4
€ 1 172,13
Disponibile
1
Salva questo articolo per dopo
Albumina di siero bovino (BSA) frazione V, pH 5,2, origine USA, 500 g
Dettagli del prodotto
Frasi P: P273 P301+P310 P331
Frasi H: H304-H410
Numero CAS: 8000-27-9
Classe di rischio: 9 III
Codice SA: 35029020
Marca: Carl Roth
Bovine Serum Albumin (BSA) Fraction V,, pH 5.2, US-Origin, min.96 %,, for protein analysis, Molar mass (M) ~66 000 g/mol, Storage temp. +4 °C, CAS No. [9048-46-8], EG-Nr. 232-936-2

For purification of this Albumin an extensive heat-shock/diafiltration method is used, which has been shown to bring more highly purified products than the standard process acc. to Cohn. The process is taking place in a closed system.


Molar extinction coefficient: 4,4x104 L x mol-1 x cm-1 (acc. to 0,667 L x mol-1 x cm-1 for a 0,1 % solution).



Bovine Serum Albumin (BSA) Fraction V, pH 5.2, US-Origin ≥96 %, for protein analysis

The Albumin, pH 5.2, US-Origin is very well suited for all applications where Albumin is used as a stabilising reagent, for blocking or as a carrier, e.g. for stabilisation of enzymes and antibodies, or as hapten carrier in immunoassays.
The pH value of albumin pH 5.2 US-Origin is close to its pI and the protein is only weakly charged. It is, therefore, particularly recommended for use in ELISA and Western blotting, since it may help in further reducing background signals.



Recommended Application of Bovine Serum Albumins (BSA)

BSA Art. No. Recommended Application
Albumin Solution 20 %, Europe 9400 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply.
Albumin Solution 30 %, Europe 9401 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply.
Albumin Solution 30 %, with azide, US-Origin 9414 Stabilization of proteins in general, especially antibodies. Suitable for all biochemical assays, e. g. as protein standard or blocking reagent, unless special requirements apply. Recommended if albumin with certified origin USA has to be used.
Fraction V, Europe 1ETA Stabilisation of proteins and blocking reagent in protein biochemical detection systems. Basically suitable for all assays unless specific requirements apply.
Fraction V, US-Origin 3854 Stabilisation of proteins and blocking reagent in all standard biochemical detection systems. Basically suitable for all assays unless specific requirements apply. Recommended if albumin with certified origin USA has to be used.
Fraction V, NZ-Origin 8076 Stabilisation of proteins and blocking reagent in protein biochemical detection systems. Basically suitable for all assays unless specific requirements apply. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, pH 5.2, Europe 2834 Stabilisation of proteins and blocking reagent. Particularly recommended for Western-Blotting and ELISAs.
Fraction V, pH 5.2, US-Origin 1ET8 Stabilisation of proteins and blocking reagent. Particularly recommended for Western-Blotting and ELISAs. Recommended if albumin with certified origin USA has to be used.
Fraction V, sufhydryl-blocked, NZ-Origin 1ET3 Particularly sensitive assays where monomeric albumin is guaranteed to be used or where reproducibility is particularly important. Can be stored as monomers over a longer period of time.
Fraction V, biotin-free, NZ-Origin 0163 Stabilisation of proteins and blocking reagent in all biotin / streptavidin-mediated detection systems (membrane-bound- or coating-plate-assays, as well as soluble assays).
Fraction V, protease-free, Europe T844 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays.
Fraction V, protease-free, US-Origin 1ET5 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays. Recommended if albumin with certified origin USA has to be used.
Fraction V, protease-free, NZ-Origin 1ET7 Stabilisation of proteins in general, antibodies in particular, and blocking reagent in sensitive enzymatic detection systems, activity tests or protein/protein-interaction assays. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, IgG-free, US-Origin 1ET9 Stabilisation of antibodies. Blocking reagent in all antibody-mediated detection systems and Radio-Immuno Assays (RIAs). Reduces false-positive signals. Recommended if albumin with certified origin USA has to be used.
Fraction V, IgG-free, NZ-Origin 3737 Stabilisation of antibodies. Blocking reagent in all antibody-mediated detection systems and Radio-Immuno Assays (RIAs). Reduces false-positive signals. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, fatty acid-free, Europe 0052 Stabilisation of proteins and blocking reagent in detection systems. Particularly recommended for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins.
Fraction V, fatty acid-free, US-Origin 9638 Particularly for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins. Also well suited for cell biology and all antibody-mediated detection systems. Recommended if albumin with certified origin USA has to be used.
Fraction V, fatty acid-free, NZ-Origin 1ETC Stabilisation of proteins and blocking reagent in detection systems. Particularly for experiments on metabolism proteins, membrane-associated proteins and cell surface proteins. Recommended if albumin with certified origin New Zealand or Australia has to be used.
Fraction V, very low endotoxin, US-Origin 1ET6 Cell culture of all cell lines, primary cells, stem cells. Cloning and 3D-cultures or cell-stressing assays like transfections, in vitro infections, cell fusion. Recommended if albumin with certified origin USA has to be used.
Fraction V, very low endotoxin, NZ-Origin 1ET4 Cell culture of all cell lines, primary cells, stem cells. Cloning and 3D-cultures or cell-stressing assays like transfections, in vitro infections, cell fusion. Recommended if albumin with certified origin New Zealand or Australia has to be used..

Molar extinction coefficient: 4,4x104 L x mol-1 x cm-1 (acc. to 0,667 L x mol-1 x cm-1 for a 0,1 % solution).


BSA are proteins yielded from blood, which function as binding and transport proteins in blood circulation. Depending on the preparation process, the albumins contain different quality and quantities of metabolic products, enzymes, peptides, fatty acids, vitamines, etc. and are suitable for different applications.


Heatshock albumin

For purification of this Albumin an extensive heat-shock/diafiltration method is used, which has been shown to bring more highly purified products than the standard process acc. to Cohn. The process is taking place in a closed system.


Albumin, NZ-Origin is particularly recommended when procedural regulations require the use of albumin of guaranteed origin Australia or New Zealand.


BSA, US-Origin is particularly recommended if the use of albumin with certified US-Origin is dictated by process regulations.


Albumin of European origin is produced from blood of European cattle herds. It is excellent for use in all assays and products manufactured for regions outside the USA, Australia and New Zealand.


Appearance powder to flakes
Colour off-white to beige
Origin USA
Assay ≥96 %
Protein ≥96 %
Loss on drying ≤5 %
Solution (4 % in H2O) complies
pH value (10 % in H2O) 5.0-5.6
Sulphated ash ≤3 %
Visualizza altro
Potrebbe anche interessarti
METHYL 1-AMINOMETHYL-CYCLOHEXANECARBOXYLATE HCL, 97.0%, 10g
METHYL 1-AMINOMETHYL-CYCLOHEXANECARBOXYLATE HCL, 97.0%, 10g
METHYL 1-AMINOMETHYL-CYCLOHEXANECARBOXYLATE HCL, 97.0%, 10g
Codice articolo F303284-10G
€ 2 600,40
2-(4-Fluorophenyl)-4,6-diphenyl-1,3,5-triazine>98.0%(GC)200mg
2-(4-Fluorophenyl)-4,6-diphenyl-1,3,5-triazine>98.0%(GC)200mg
2-(4-Fluorophenyl)-4,6-diphenyl-1,3,5-triazine>98.0%(GC)200mg
Codice articolo F1045-200MG
€ 30,80
2-Aminobenzo[d]oxazole-5-carboxylic acid, 98%, 250mg
2-Aminobenzo[d]oxazole-5-carboxylic acid, 98%, 250mg
2-Aminobenzo[d]oxazole-5-carboxylic acid, 98%, 250mg
Codice articolo F786904-250MG
€ 277,20
2,2',2''-(1,4,7-Triazonane-1,4,7-triyl)triacetic Acid>98.0%(HPLC)200mg
2,2',2''-(1,4,7-Triazonane-1,4,7-triyl)triacetic Acid>98.0%(HPLC)200mg
2,2',2''-(1,4,7-Triazonane-1,4,7-triyl)triacetic Acid>98.0%(HPLC)200mg
Codice articolo T3910-200MG
€ 176,00
6-Methyl-1,3-dihydrofuro[3,4-c]pyridin-7-ol, 98%, 250mg
6-Methyl-1,3-dihydrofuro[3,4-c]pyridin-7-ol, 98%, 250mg
6-Methyl-1,3-dihydrofuro[3,4-c]pyridin-7-ol, 98%, 250mg
Codice articolo F764479-250MG
€ 154,00
3-Methylthiophene-2-carboxaldehyde, tech, 1g
3-Methylthiophene-2-carboxaldehyde, tech, 1g
3-Methylthiophene-2-carboxaldehyde, tech, 1g
Codice articolo F024308-1G
€ 15,40
End user declaration required
Butylamine Hydrochloride>98.0%(T)25g
Butylamine Hydrochloride>98.0%(T)25g
Butylamine Hydrochloride>98.0%(T)25g
Solo per aziende registrate
Codice articolo B0710-25G
€ 20,90
2,4,6-Trichlorobenzaldehyde, 95.0%, 1g
2,4,6-Trichlorobenzaldehyde, 95.0%, 1g
2,4,6-Trichlorobenzaldehyde, 95.0%, 1g
Codice articolo F237611-1G
€ 15,40
ethyl (3-amino-4H-thieno[3,4-c]pyrazol-2(6H)-yl)acetate, 95.0%, 500mg
ethyl (3-amino-4H-thieno[3,4-c]pyrazol-2(6H)-yl)acetate, 95.0%, 500mg
ethyl (3-amino-4H-thieno[3,4-c]pyrazol-2(6H)-yl)acetate, 95.0%, 500mg
Codice articolo F495277-500MG
€ 1 293,60
2-((5-Bromopyrimidin-2-yl)thio)acetic acid, 95.0%, 250mg
2-((5-Bromopyrimidin-2-yl)thio)acetic acid, 95.0%, 250mg
2-((5-Bromopyrimidin-2-yl)thio)acetic acid, 95.0%, 250mg
Codice articolo F376342-250MG
€ 38,50
4-Bromo-1-methyl-1H-1,2,3-triazole, 95.0%, 250mg
4-Bromo-1-methyl-1H-1,2,3-triazole, 95.0%, 250mg
4-Bromo-1-methyl-1H-1,2,3-triazole, 95.0%, 250mg
Codice articolo F209306-250MG
€ 17,60
2-Methyl-3-propylpyrazine>95.0%(GC)5mL
2-Methyl-3-propylpyrazine>95.0%(GC)5mL
2-Methyl-3-propylpyrazine>95.0%(GC)5mL
Codice articolo M0841-5ML
€ 35,20
  • Cerca prodotti
  • Il mio profilo
  • Verifica ordini
  • Preferiti
  • Carrello
Tecnologia Lightspeed
Mostra prezzi in:EUR
Passa al contenuto principale
SciSupplies
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Menu
Negozio
Chi siamo
Contattaci
FAQ
Blog

Parte di HD Beverwijk Trading

Lingua:
IT
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Termini e condizioniInformativa sulla privacyInformazioni di spedizione e pagamentoPolitica di resoSegnala abuso
Tecnologia Lightspeed