The Carl ROTH series - mature technology in modern design
Three units for all applications in electrophoresis:MINI, STANDARD and BLOT.
For horizontal mini gels, rapid analyses of nucleic acids and for students courses.
Connection with up to 2 units possible.
Type | MINI (nanoPAC-300P) |
Voltage range | 1-300 V |
Current | 1-400 mA |
Performance | 60 W |
Volt-hours | 49,995 kVh |
Timer display | 1-1999 min |
Display type | LED |
Resolution | 1 V 1 mA |
Unit of measurement | Constant V or mA with automatic crossover |
Program | Manually adjustable (Constant Mode) 2-step program, editable 2-step program, pre-assigned |
Connection | Outlets: 2 Parallel socket pairs: 4 mm |
Min. load resistance | 5 Ohm |
Safety devices | Detection of "no load", overload and overheating |
Ambient temperature | 4-40 °C |
Approval | CE, ETL, FCC |
W x D x H | 14 x 19.1 x 8.4 cm |
Weight | 1,0 kg |
Mains connection | 100-240 V, 50/60 Hz, 2,5 A |
Unit | for 1–2 Units | for 3–4 Units |
MINIeasy | Roth-MINI, EV2310 | Roth-MINI, EV2310 |
PROfessional I | ||
MINI | ||
PROfessional II | Roth-STANDARD, EV2310 | Roth-STANDARD, EV2310, EV2650 |
MIDI 1 | ||
PROfessional III | Roth-STANDARD, EV2310, EV2650 | Roth-BLOT, EV2650 |
MIDI PLUS | ||
PROfessional IV | EV2650, EV3610 | Roth-BLOT, EV2650, EV3610 |
MIDI 2 | ||
PROfessional V | Roth-BLOT, EV3610 | |
MAXI | ||
VARIA 1 | Roth-BLOT, EV2650, EV3610 | |
PROfessional Acetat | Roth-STANDARD, EV2310 | Roth-STANDARD, EV2650 |
MULTI | EV3150 | EV3330 |
PROclamp MINI | Roth-STANDARD, EV2310 | Roth-STANDARD, EV2310, EV2650 |
PROclamp MINI Wide | ||
MINI vertikal | ||
PROclamp MAXI | Roth-BLOT, EV2310, EV3610 | Roth-BLOT, EV2650, EV3150 |
MAXI vertikal | ||
Sequencing | EV3330, EV3620 | EV3330, EV3620 |
IEF | EV3150, EV3330 | EV3150, EV3330 |
MINI-Blotting | Roth-MINI, EV2310 | EV2310, EV3610 |
MAXI-Blotting | Roth-BLOT, EV2310, EV3610 | Roth-BLOT, EV3610, EV3020 |
Electroelution | Roth-MINI, EV3610 | Roth-STANDARD, EV2650, EV3610, EV3150 |
COMPAC-50 Comet Assay | Roth-STANDARD, EV2310, EV2650 | Roth-BLOT, EV2650 |
When connecting several units, a higher voltage must be applied in order to attain the same intensity of current and output and, subsequently, the same separating capacity. |