Accueil/Magasin/Sciences de la vie/Microscopie/Substrats pour l'histologie/Substrats pour la peroxydase de raifort (HRP)
ROTI®Lumin, 2 x 25 ml

ROTI®Lumin, 2 x 25 ml

Référence P078.2
€ 143,81
En stock
1
Enregistrer ce produit pour plus tard
ROTI®Lumin, 2 x 25 ml
Détails du produit
Phrases P: P202 P280 P302+P352 P305+P351+P338 P310
Phrases H: H314-H341
Classe de danger: 8 II
Code SH: 38229000
Marque: Carl Roth
ROTI®Lumin, 10x conc., fluorecent-free, for protein and cytoimmunochemistry, Storage temp. +4 °C

  • Sensitive and reliable
  • For all standard membrane types
  • Low background
  • No cumbersome preparation of peroxidase buffers
  • Suitable for multiple stripping and hybridisation

ROTI®Lumin is a kit for chemoluminescent detection of peroxidase-linked reporters (e.g. HRP-antibodies), as can be found in Western-Blot assays. In comparison to chromogen substrates, ROTI®Lumin displays increased sensitivity and reduced background reaction.


Mechanisme

ROTI®Lumin is transformed by the HRP into an excited dianion in the presence of hydrogen peroxide. When the dianion is reversed back to its normal state, light is emitted. The light emission of ROTI®Lumin reaches its maximum within 5 minutes and remains at the maximum level for approx. 1-2 hours.



ROTI®Lumin 10x conc., fluorescence-free, for protein and cytoimmunochemistry
Gebruiksinstructies

ROTI®Lumin consists of two solutions, which should be mixed at a 1:1 ratio before use. It can be used with nitrocellulose, nylon and PVDF membranes. Optimal results can be achieved with Immobilon-P® PVDF or ROTI®PVDF.
Can be used for Western-Blotting, ELISA, Southern- Blotting, Dot-Blotting and colony hybridisation. Membranes may be stripped from bound probes using ROTI®Free stripping buffer, and may thus undergo multiple reprobing.

RotiLumine_Sensitivitaet
Figure: Sensitivity of the ROTI®Lumine.
Sensitivity of ROTI®Lumin ultra is found in low femtogram range. Detection of a polyclonal antibody (left to right 4 pg, 400 fg, 40 fg, 4 fg) on ROTI®PVDF (Art. No. T830.1). Staining in PBST via a HRP-conjugated anti-rabbit antibody (1:2000).
a/A: ROTI®Lumin ultra; b/B: ROTI®Lumin plus; c/C: ROTI®Lumin; d/D: Product of a competitor, recommended for femtogram range. a/b/c/d: 10 sec. exposition, A/B/C/D: 1 min. exposition.
3692_Diagramm_Lichtemission30min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-30 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.

De kit bevat

120 ml (25 ml) ROTI®Lumin 1 (Art. No. P079) and 120 ml (25 ml) ROTI®Lumin 2 (Art. No. P080).
Contents of this Kit may not be bought separately.

3692_Diagramm_LichtemissionB
Figure:
Relative sensitivity of ROTI®Lumins. Measurement of the relative light emission following ECL reaction with solubilised HRP.
Competitor P: Product of a competitor, recommended for femtogram range.
3692_Diagramm_Lichtemission5min
Figure:
Typical course of light emission of the ROTI®Lumins: 0-5 mins., post mixing/spraying. Competitor P: Product of a competitor, recommended for femtogram range.


Technische informatie
Toepassing Western, in situ, Histochemistry
Enzyme Horseradish Peroxidase
Bewijs chemoluminescent
Signaalproduct Precipitate (Blot)
Toepassing Western
Assay protocol for use of BCIP/NBT in immunoblot procedures:

Stock solutions (All solutions are stable for at least 1 year at 4 °C):
0.5 g NBT in 10 ml 70 % dimethylformamide;
0.5 g BCIP (p-toluidine salt) in 10 ml 100 % dimethylformamide.
Incubation buffer for alkaline phosphatase:
100 mM NaCl, 5 mM MgCl2,100 mM Tris (pH 9.5).
Fresh substrate solution: 66 μl NBT stock solution + 10 ml incubation buffer, mix well, add 33 μl BCIP stock solution. Use within 1 hour.
Blot development: Approx. 10 ml substrate solution per 15 x 15 cm2 membrane surface. Develop at room temperature until bands become visible (approx. 30 mins).
Reaction stop: Rinse with PBS/20 mM EDTA.


Detection of peroxidase activity (Immunoassay):

Dissolve 1 mg TMB in 0.1 ml dimethylsulfoxide (Art. No. 4720); add 9.9 ml of a 0.1 M sodium acetate solution (pH 6.0) (Powder: Art. No. 6779), filter and add H2O2 (Art. No. 8070) (final concentration 0.01 %).

Always prepare freshly!

Incubation 10-30 mins at room temperature (approx. 50 μl per microtitre well; finally add 50 μl 1 M H2SO4, Art. No. X873, per well).
Photometric quantitation at 450 nm.

Reference: Bos E.S. et al. (1981) J. Immunoassay 2, (3/4), 187.


Voir plus
Vous aimerez peut-être aussi
(2-Bromo-5H-pyrrolo[2,3-b]pyrazin-7-yl)methanol, 95+%, 1g
(2-Bromo-5H-pyrrolo[2,3-b]pyrazin-7-yl)methanol, 95+%, 1g
(2-Bromo-5H-pyrrolo[2,3-b]pyrazin-7-yl)methanol, 95+%, 1g
Référence F621760-1G
€ 1 481,70
2-(3-((4-Fluorophenoxy)methyl)phenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane, 97%, 250mg
2-(3-((4-Fluorophenoxy)methyl)phenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane, 97%, 250mg
2-(3-((4-Fluorophenoxy)methyl)phenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane, 97%, 250mg
Référence F761655-250MG
€ 86,90
1,4-Dioxa-8-azaspiro[4.5]decane hydrochloride, 95.0%, 100g
1,4-Dioxa-8-azaspiro[4.5]decane hydrochloride, 95.0%, 100g
1,4-Dioxa-8-azaspiro[4.5]decane hydrochloride, 95.0%, 100g
Référence F214732-100G
€ 94,60
(S)-4-(Amino(carboxy)methyl)benzoic acid hydrochloride, 97.0%, 250mg
(S)-4-(Amino(carboxy)methyl)benzoic acid hydrochloride, 97.0%, 250mg
(S)-4-(Amino(carboxy)methyl)benzoic acid hydrochloride, 97.0%, 250mg
Référence F542170-250MG
€ 853,60
(S)-3-((TERT-BUTYLDIMETHYLSILYL)OXY)PYRROLIDIN-2-ONE, 95.0%, 1g
(S)-3-((TERT-BUTYLDIMETHYLSILYL)OXY)PYRROLIDIN-2-ONE, 95.0%, 1g
(S)-3-((TERT-BUTYLDIMETHYLSILYL)OXY)PYRROLIDIN-2-ONE, 95.0%, 1g
Référence F506269-1G
€ 196,90
2-Cyano-5-fluoropyridine, 98.0%, 25g
2-Cyano-5-fluoropyridine, 98.0%, 25g
2-Cyano-5-fluoropyridine, 98.0%, 25g
Référence F049469-25G
€ 56,10
Ciseaux Physiologie courbes RMH, 130 mm 1 pièce
Ciseaux Physiologie courbes RMH, 130 mm 1 pièce
Ciseaux Physiologie courbes RMH, 130 mm 1 pièce
Référence HCX0.1
€ 62,86
4-Aminopentanoic acid, 95+%, 1g
4-Aminopentanoic acid, 95+%, 1g
4-Aminopentanoic acid, 95+%, 1g
Référence F684369-1G
€ 119,90
Ethyl 6-aminoimidazo[1,2-a]pyridine-2-carboxylate, 95.0%, 250mg
Ethyl 6-aminoimidazo[1,2-a]pyridine-2-carboxylate, 95.0%, 250mg
Ethyl 6-aminoimidazo[1,2-a]pyridine-2-carboxylate, 95.0%, 250mg
Référence F077183-250MG
€ 22,00
N-(4-nitrobenzyl)propan-2-amine, 98%, 5g
N-(4-nitrobenzyl)propan-2-amine, 98%, 5g
N-(4-nitrobenzyl)propan-2-amine, 98%, 5g
Référence F771537-5G
€ 1 029,60
2-Bromo-1-ethylpyridinium tetrafluoroborate, 98.0%, 10g
2-Bromo-1-ethylpyridinium tetrafluoroborate, 98.0%, 10g
2-Bromo-1-ethylpyridinium tetrafluoroborate, 98.0%, 10g
Référence F008541-10G
€ 104,50
Bécher ROTILABO®, 250 ml, 1 pièce
Bécher ROTILABO®, 250 ml, 1 pièce
Bécher ROTILABO®, 250 ml, 1 pièce
Référence YX58.1
€ 7,49
  • Rechercher parmi les produits
  • Mon Compte
  • Suivi de commande
  • Favoris
  • Panier
Afficher les prix en :EUR
Passer au contenu principal
SciSupplies
Shop
À propos
Contactez-nous
FAQ
FR
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Mon compteRecherche
Panier
Menu
Fait partie de HD Beverwijk Trading
Langue:
FR
NLNederlands
DEDeutsch
ENEnglish
FRFrançais
ESSpanish
ITItaliano
Conditions généralesPolitique de protection de la vie privéeInformations d'expédition et de paiementPolitique de retourSignaler un abus
Fabriqué avec Ecwid par Lightspeed